This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

OPA320AQDBVRQ1 +BOM

Automotive qualified, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier

OPA320AQDBVRQ1 Information

OPA320AQDBVRQ1 X-Ray Inspection

OPA320AQDBVRQ1

Description

The Texas Instruments OPA320AQDBVRQ1 is a precision operational amplifier designed for automotive applications. It offers high precision, reliability, and robustness in harsh environments. This device features zero-crossover distortion, low offset voltage, high common-mode rejection ratio (CMRR), and rail-to-rail input/output (I/O). With a low input bias current of 0.9 pA and a noise level of 7 nV/√Hz at 10 kHz, it is suitable for applications requiring precision and stability. The OPA320AQDBVRQ1 is commonly used in automotive electronics such as power management, sensor interface, and audio systems. Its small VSSOP package and single-supply voltage range of 1.8 to 5.5 V make it a versatile component for various automotive applications.

Features

According to the product information, the features of the OPA320AQDBVRQ1 include:

  • Qualified for Automotive Applications (AEC-Q100)
  • Precision with Zero-Crossover Distortion:
  • + Low Offset Voltage: 150 µV (max)
  • + High CMRR: 114 dB
  • + Rail-to-Rail I/O
  • Low Input Bias Current: 0.9 pA (max)
  • Low Noise: 7 nV/√Hz at 10kHz
  • Wide Bandwidth: 20 MHz
  • Slew Rate: 10 V/µs
  • Quiescent Current: 1.45 mA/ch
  • Single-Supply Voltage Range: 1.8 to 5.5 V
  • Unity-Gain Stable
  • Small VSSOP Package

These features make the OPA320AQDBVRQ1 suitable for automotive applications, such as power management, sensor interface, and audio systems, where high precision and reliability are required.

Package

The package type of OPA320AQDBVRQ1 is SOT-23 (DBV)-5.

Pinout

The OPA320AQDBVRQ1 operational amplifier has a single package type SOT-23 (DBV), which is a tiny 5-pin package. Although the datasheet does not explicitly mention the pin count or function, we can assume that this part follows the standard pinout for a SOT-23 package. Typical pinouts for a SOT-23 package are: 1. Positive Supply (VDD) 2. Ground (GND) 3. Negative Supply (VSS) or Output 4. Inverting Input (Vin-) 5. Non-Inverting Input (Vin+) These pins are general-purpose input/output terminals, and their exact function depends on the specific application and circuit design.

Manufacturer

The manufacturer of the OPA320AQDBVRQ1 is Texas Instruments (TI). Texas Instruments is a multinational semiconductor company that designs, manufactures, tests, and sells semiconductors and other electronic components. It is one of the largest and most successful semiconductor companies in the world. TI offers a broad range of products including analog and embedded processing ICs, specialty logic, digital signal processors, microcontrollers, and interface drivers for automotive, industrial, consumer, medical, aerospace, and defense markets.

Applications

The OPA320AQDBVRQ1 is commonly used in automotive electronics such as power management, sensor interface, and audio systems. Its high precision and reliability make it suitable for harsh automotive environments where temperature, vibration, and electromagnetic interference are present.

Equivalent

The equivalent products of OPA320AQDBVRQ1 include:

  • OP27BGA
  • OP4844EWMX
  • LM833ADZ

These operational amplifiers share similar characteristics, such as precision, zero-crossover distortion, low input bias current, and high CMRR, but may have different package types or supply voltage ranges. Please note that this is not an exhaustive list, and there might be other equivalent products available from various manufacturers.

OPA320AQDBVRQ1

Specifications

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 1.8 Vos (offset voltage at 25°C) (max) (mV) 0.15
GBW (typ) (MHz) 20 Features EMI Hardened, Shutdown, Zero Crossover
Slew rate (typ) (V/µs) 10 Rail-to-rail In, Out
Offset drift (typ) (µV/°C) 1.5 Iq per channel (typ) (mA) 1.45
Vn at 1 kHz (typ) (nV√Hz) 8.5 CMRR (typ) (dB) 114
Rating Automotive Operating temperature range (°C) -40 to 125
TI functional safety category Functional Safety-Capable Input bias current (max) (pA) 0.9
Iout (typ) (A) 0.065 Architecture CMOS
Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) 0.1
Output swing headroom (to negative supply) (typ) (V) 0.01 Output swing headroom (to positive supply) (typ) (V) -0.01
THD + N at 1 kHz (typ) (%) 0.0005 Package/Case SOT-23-5

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method +

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method +

fedex
Fedex
ups
UPS
dhl
DHL
tnt
TNT
Packing +

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

365-Day Product Quality Guarantee +

We promise to provide 365 days quality assurance service for all our products.
After Sales Service +

Returns and exchanges are supported, provided the items remain in their original condition.

Ratings and Reviews

More
E
E**a 01/28/2024

Well arrived the package thank you

3

Reviews

You need to log in to reply. Sign In | Sign Up

pay transport
colse