Payment Method
NE5532P +BOM
Dual, 30-V, 10-MHz, low-noise operational amplifier for audio applications
DIP8-
Manufacturer:
-
Mfr.Part #:
NE5532P
-
Datasheet:
-
GenericPartNumber:
NE5532
-
PartDescription:
Dual, 30-V, 10-MHz, low-noise operational amplifier for audio applications
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on NE5532P. Guaranteed response within 12hr.
Availability: 5996 PCS
Please fill in the short form below and we will provide you the quotation immediately.
Description
The Texas Instruments NE55LP (not NE55P) is a dual, low-noise operational amplifier designed for audio applications. It features a high common-mode rejection ratio (CMRR), low noise gain, and a wide operating temperature range. The device operates from ±2 to ±12 V power supplies and has a maximum frequency of 10 MHz. The NE55LP is suitable for preamplifiers, tone control circuits, and audio mixers in professional audio equipment. Its high CMRR and low noise gain make it ideal for applications where electromagnetic interference (EMI) is present. The device also finds use in instrumentation amplifiers, active filters, and voltage regulators. In summary, the NE55LP is a dual operational amplifier designed for high-performance audio applications that require low noise and high common-mode rejection ratio.
Features
The NE55LP (not NE55P) features:
- Dual operational amplifier in a single package
- Low noise, high gain, and low distortion for audio applications
- Operating temperature range of -40°C to +125°C
- Power consumption: 3.5 mW at ±2 V and 1 MHz
- Noise gain: 100 dB typ at 1 kHz
- Input bias current: ±0.5 nA at ±5 V input
- Output drive capability: 10 mA sink, 20 mA source typ
It is commonly used in audio applications such as preamplifiers, tone control circuits, and audio mixers, as well as instrumentation amplifiers for measurement equipment and active filters/voltage regulators for signal processing.
Package
The package type of NE55P32 is Dual-In-Line Packages - P (R- PDIP-T8).
Pinout
The NE55LP (not NE55P) is a dual operational amplifier in a DIP-16 package.
Pin Count: 1. VCC (Positive Supply) 2. VEE (Negative Supply) 3. Non-Inverting Input (Pin 3) 4. Inverting Input (Pin 4) 5. Output (Pin 6) 6. Output (Pin 7) 8. GND (Ground)
Functions:
- Pin 3 and Pin 4: Inputs for the two operational amplifiers
- Pin 6 and Pin 7: Outputs for the two operational amplifiers
- Pin 1 and Pin 2: Positive and negative power supply connections
Manufacturer
The manufacturer of the NE55P32 is Texas Instruments (TI). TI is a leading semiconductor company that designs, manufactures, and tests semiconductors and related technologies. The company was founded in 1930 and is headquartered in Dallas, Texas. TI is a well-known brand in the electronics industry, offering a wide range of products including analog and embedded processing chips, sensors, and interface solutions.
Applications
The NE55LP is commonly used in audio applications, including preamplifiers, tone control circuits, and audio mixers. It's also utilized in instrumentation amplifiers for accurate signal amplification in measurement equipment. Additionally, it finds application in active filters and voltage regulators for precise signal processing and stabilization.
Equivalent
The equivalent products of NE55...
Specifications
genericPartNumber | NE5532 | orderablePartNumber | NE5532P |
partDescription | Dual, 30-V, 10-MHz, low-noise operational amplifier for audio applications | statusDisplay | ACTIVE |
statusDescription | This product has been released to the market and is available for purchase. For some products, newer alternatives may be available. | Package/Case | DIP8 |
NE5532P Equivalent Parts
You may consider these replacement and alternative parts:
Part Number
In-Stock
Package
Description
Part Number: NJM5532
In-Stock: 200
Package:
Description: dual operational amplifier
Part Number: LM833
In-Stock: 300
Package:
Description: dual operational amplifier
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
NE5532P Datasheet PDF
NE5532P PDF Preview
In Stock: 5,996
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.515 | $0.52 |
10+ | $0.418 | $4.18 |
50+ | $0.353 | $17.65 |
100+ | $0.301 | $30.10 |
500+ | $0.277 | $138.50 |
1000+ | $0.264 | $264.00 |
The prices below are for reference only.
Related
Top Sellers
-
LM324
Texas Instruments
V capable, fast and stable operational amplifi
-
LM741
Texas Instruments
High-performance operational amplifier ideal for professional applications requiring precision and reliability
-
TL072
Texas Instruments
Ideal for precision analog circuits requiring low noise and distortio
-
PT1000
Atlas Scientific
Unmatched amplification capabilities for a superior listening experience
-
LM324NS
Texas Instruments
With its advanced design, the LMS by Texas Instruments excels in precision and flexibility for diverse applications
Untested but looks good and arrived quickly