This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MAX707CPA+ +BOM

State-of-the-art circuitry for efficient supervisory control

Manufacturer:

Analog Devices
Mfr.Part #:

MAX707CPA+
Datasheet:

MAX707CPA+ Datasheet (PDF)
Type:

Voltage Supervisory
Mounting Style:

Through Hole
Threshold Voltage:

4.65 V
Number Of Inputs Monitored:

1 Input
EDA/CAD Models:

Request Free CAD Models for MAX707CPA+

MAX707CPA+ Information

General Description

The MAX707CPA is a precision voltage reference integrated circuit manufactured by Maxim Integrated. It operates over a wide temperature range of -40°C to 85°C, making it suitable for a variety of industrial and automotive applications.The MAX707CPA provides a stable output voltage of 5V with a typical accuracy of ±0.02%. It has a low temperature coefficient of 6ppm/°C and a low output voltage noise of 4μVP-P, ensuring reliable and consistent performance. The device has a low quiescent current consumption of 250μA, making it energy-efficient.The MAX707CPA is available in an 8-pin plastic DIP package, making it easy to integrate into existing circuit designs. It requires a supply voltage of 8V to 35V and can drive loads of up to 10mA.The device features a built-in output short-circuit protection to prevent damage to the circuit in case of overload conditions. It also has a shutdown pin for reducing power consumption when the device is not in use.

Key Features

Fast Response Time Reduces System Downtime
Improved Power Supply Regulation Ensures Stable Operation
Enhanced Functional Integration Simplifies PCB Design

Application

Power supply sequencing
Voltage monitoring
Microprocessor supervisory circuits
System reset circuits
Power fail detection
Battery backup systems
Automotive and industrial applications
Portable devices
Embedded systems
Communication equipment

Specifications

Product Category	Supervisory Circuits	Type	Voltage Supervisory
Mounting Style	Through Hole	Threshold Voltage	4.65 V
Number of Inputs Monitored	1 Input	Output Type	Active High, Active Low, Push-Pull
Manual Reset	Manual Reset	Watchdog Timers	No Watchdog
Battery Backup Switching	No Backup	Reset Delay Time	200 ms
Supply Voltage - Max	5.5 V	Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C	Accuracy	2.5 %
Chip Enable Signals	No Chip Enable	Height	4.45 mm (Max)
Length	9.91 mm (Max)	Operating Supply Current	350 uA
Overvoltage Threshold	4.75 V	Pd - Power Dissipation	727 mW
Power Fail Detection	Yes	Product Type	Supervisory Circuits
Factory Pack Quantity	50	Subcategory	PMIC - Power Management ICs
Supply Voltage - Min	1 V	Undervoltage Threshold	4.5 V
Width	7.87 mm (Max)	Part # Aliases	MAX707
Unit Weight	0.032805 oz	Package/Case	DIP-8