This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


16 Bit Digital to Analog Converter 1 8-SOIC

Inquiry Add To Bom

MAX5541ESA+ General Description

The MAX5541 serial-input, voltage-output, 16-bit monotonic digital-to-analog converter (DAC) operates from a single +5V supply. The DAC output is unbuffered, resulting in a low 0.3mA supply current and low 1 LSB offset error. The DAC output range is 0V to VREF. The DAC latch accepts a 16-bit serial word. A power-on reset (POR) circuit clears the DAC output to 0V (unipolar mode) when power is initially applied.

Maxim Integrated Inventory

Key Features

  • Full 16-Bit Performance Without Adjustments
  • +5V Single-Supply Operation
  • Low Power: 1.5mW
  • 1µs Settling Time
  • Unbuffered Voltage Output Directly Drives 60kΩ Loads
  • SPI/QSPI/MICROWIRE-Compatible Serial Interface
  • Power-On Reset Circuit Clears DAC Output to 0V (unipolar mode)
  • Schmitt Trigger Inputs for Direct Optocoupler Interface
  • Choose MAX541 as a 1 LSB (max) INL Upgrade to the MAX5541


  • Automated Test Equipment (ATE)
  • Data Acquisition
  • High-Resolution Offset and Gain Adjustment
  • Industrial Process Controls


model MAX5541ESA+ package Small-Outline IC, Narrow (0.15in)
packingQty Tube,100 packingOption Tube
packageType S8+5 rohs roHSY
lifeCycle production tempRange -40 to 85C
Mfr Analog Devices Inc./Maxim Integrated Series -
Package Tube Product Status Active
DigiKey Programmable Not Verified Number of Bits 16
Number of D/A Converters 1 Settling Time 1µs (Typ)
Output Type Voltage - Unbuffered Differential Output No
Data Interface SPI Reference Type External
Voltage - Supply, Analog 5V Voltage - Supply, Digital 5V
INL/DNL (LSB) ±4, ±0.5 Architecture R-2R
Operating Temperature -40°C ~ 85°C Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC Mounting Type Surface Mount
Base Product Number MAX5541
MAX5541: Functional Block Diagram

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

TT/Wire Transfer
Western Union
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

D**n 02/29/2024

It was almost a month before chelyabinsk. Works.

J**t 01/27/2023

Fast shipping, good quality.

M**n 07/27/2022

I thought that there is a 12/5 volt interchange, planning to change it to 5/5 for my task, but it turned out that 12/3 (more precisely, the output value of 3,7 volts). Well, i found in the acoustics where i installed, 14 volts, connected through 150 ohms sequentially-at the output of the junction those 3,7 volts. Connect quickly, sounds qualitatively (noticeably better than the modules on the 8630 chip), but here is one problem: if after power off immediately turn it on again, then the module does not start-it is not visible to devices and does not blink with leds. If you hold in the off state for about a minute, everything is working again. I do not know what this behavior is associated with, but definitely not with my consistently switched on resistor (tried without it, from the 12 v power supply is the same). However, this is not critical, because. I turn on/off the acoustics, i'm much less likely than once a minute.

M**n 02/21/2022

arrived after 40 days to Hungary, packed in envelope. Will test later.



You need to log in to reply. Sign In | Sign Up

Availability: 4799 PCS

Qty. Unit Price(USD) Ext. Price
1+ $10.519 $10.52
10+ $10.375 $103.75
30+ $10.124 $303.72
100+ $9.904 $990.40

The prices below are for reference only.