This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

LP87332DRHDRQ1

Buck Regulator with LDO 2.8V to 5.5V Automotive 28-Pin VQFN EP T/R

Inquiry Add To Bom

LP87332DRHDRQ1 General Description

The LP87332D-Q1 is designed to meet the power management requirements of the latest processors and platforms in automotive camera and radar applications. The device has two step-down DC/DC converters, two linear regulators, and two general-purpose digital-output signals. The device is controlled by an I2C-compatible serial interface and by an enable signal.

The automatic PWM/PFM (AUTO mode) operation gives high efficiency over a wide output-current range. The LP87332D-Q1 supports remote voltage sensing to compensate IR drop between the regulator output and the point-of-load (POL), thus improving the accuracy of the output voltage. In addition, the switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances.

The LP87332D-Q1 device also supports programmable start-up and shutdown delays and sequences including GPO signals synchronized to the enable signal. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the in-rush current.

Texas Instruments, Inc Inventory

Key Features

  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Input voltage: 2.8 V to 5.5 V
  • Two high-efficiency step-down DC/DC converters:
    • Output voltage: 0.7 V to 3.36 V
    • Maximum output current 3 A
    • Programmable output-voltage slew rate from 0.5 mV/μs to 10 mV/μs
    • 2-MHz switching frequency
    • Spread-spectrum mode and phase interleaving for EMI reduction
  • Two linear regulators:
    • Input voltage: 2.5 V to 5.5 V
    • Output voltage: 0.8 V to 3.3 V
    • Maximum output current 300 mA
  • Configurable general-purpose output signals (GPO, GPO2)
  • Interrupt function with programmable masking
  • Programmable power-good signal (PGOOD)
  • Output short-circuit and overload protection
  • Overtemperature warning and protection
  • Overvoltage protection (OVP) and undervoltage lockout (UVLO)
  • 28-pin, 5-mm × 5-mm VQFN package with wettable flanks
Texas Instruments, Inc Original Stock
Texas Instruments, Inc Inventory

Specifications

Category Integrated Circuits (ICs)Power Management (PMIC)Voltage Regulators - Linear + Switching Mfr Texas Instruments
Series Automotive, AEC-Q100 Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status Active Topology Step-Down (Buck) (2), Linear (LDO) (2)
Number of Outputs 4 Frequency - Switching 2MHz
Voltage/Current - Output 1 0.7V ~ 3.36V, 3A Voltage/Current - Output 2 0.7V ~ 3.36V, 3A
Voltage/Current - Output 3 0.8V ~ 3.3V, 300mA w/LED Driver No
w/Supervisor No w/Sequencer No
Voltage - Supply 2.5V ~ 5.5V Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount, Wettable Flank Package / Case 28-VFQFN Exposed Pad
Supplier Device Package 28-VQFN (5x5)

Shipping

Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail

Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram

Guarantees

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD

    ESD

  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray

Reviews

You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of LP87332DRHDRQ1?

    The lifespan of LP87332DRHDRQ1 depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of LP87332DRHDRQ1?

    You can find it with PDF Datasheet for LP87332DRHDRQ1 on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of LP87332DRHDRQ1?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of LP87332DRHDRQ1 or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.