This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

LAN7800T/VSX

USB Super Speed Ethernet.

Inquiry Add To Bom

LAN7800T/VSX General Description

Microchip's LAN7800 is a Super Speed USB3 Gen1 to 10/100/1000 Gigabit Ethernet bridge providing an ultra high-performance and cost-effective USB to Ethernet connectivity solution. The LAN7800 contains an integrated 10/100/1000 Gigabit Ethernet PHY, USB PHY, Hi-Speed USB 2.0 device controller, SuperSpeed USB3.1 Gen 1 device controller, 10/100/1000 Gigabit Ethernet MAC, Integrated OTP, EEPROM controller. The device supports 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet and implements Control, Interrupt, Bulk-in and Bulk-out USB endpoints. The Ethernet controller supports auto-negotiation, auto-polarity correction, HP Auto-MDIX† support and is compliant with IEEE 802.3/802.3u/802.3ab standards.

USB-based networking provides flexibility for the routing and placement of network connections anywhere in the system. USB-based solutions leverage the existing USB stack for the Ethernet driver. The LAN7800 is also available with a wide range of drivers including Windows®, Mac® and Linux®.

The LAN7800 also offers Microchip’s NetDetach™ and UniClock™ technologies. NetDetach allows for reduced power by enabling the host CPU to enter a low-power state when Ethernet is inactive. UniClock simplifies the clocking scheme and reduces system BOM cost by using a single 25MHz crystal for both USB and Ethernet connectivity. Multiple power management features are provided, including various low-power modes and Magic Packet™, Wake-on-LAN (WoL) and Link Status Change wake events. MSFT QOAC (Alway On Always Connected) is also supported. These wake events can be programmed to initiate a USB remote wakeup and if desired, also generate a hardware PME event. The device is available in commercial (0° to 70°C) and industrial temperature range (-40° to 85°C) options.

Microchip's complimentary and confidential LANCheck® and USBCheck™ online design review services are available for customers who have selected our products for their application design-in*.

†HP Auto-MDIX eliminates the need for special "crossover" cables when connecting LAN devices together.

*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Microchip Technology, Inc Inventory

Key Features

  • Single-chip, Super-Speed USB3 Gen1 to 10/100/1000 Ethernet controller
  • Fully supports IEEE 802.3/802.3u/802.3ab standards
  • Fully supports transformerless board level links
  • 9K jumbo frames are supported
  • IEEE 802.3az-2010 - Energy Efficient Ethernet (EEE)
  • Implements NetDetach™ technology for reduced system power consumption
  • Provides dedicated PME wake-up signal
  • Always On Always Connected (AOAC)
  • Internal OTP memory to remove the need for external EEPROM
  • Integrated core voltage regulator
  • Requires only a single 25MHz crystal
  • Easy upgrade for USB-based 10/100 Ethernet (LAN9500/9500A) to 10/100/1000 Gigabit Ethernet
  • Industrial temperature range option available. -40°C ? +85°C (LAN7800-I)
  • 7x7mm, 48-pin SQFN (0.5mm pitch) , RoHS-compliant package
  • 6x6mm, 48-pin SQFN (0.4mm pitch) , RoHS-compliant package
    • Applications
    • Consumer Electronics Devices
    • Netbooks/Smartbooks/MIDs
    • Docking Stations
    • Embedded Systems
    • Digital TVs (DTVs)
    • Cameras
    • Personal Video Recorders (PVRs)
    • Network Printers
    • USB Port Replicators
    • Stand-alone USB to Ethernet Dongles
    • Industrial Platforms
      Driver & Software
    • A driver supporting this product is already present in the Linux mainline kernel. Specific backports, when available, can be found within the drivers listed here.
    • Android is supported via Linux mainline or, when applicable, specific backports available via the documentation link on this page.
    Microchip Technology, Inc Original Stock

    Specifications

    Category Integrated Circuits (ICs)InterfaceControllers Mfr Microchip Technology
    Series - Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
    Product Status Active Digi-Key Programmable Not Verified
    Protocol Ethernet Function Controller
    Interface - Standards 10/100/1000 Base-T PHY
    Voltage - Supply 1.2V, 2.5V, 3.3V Current - Supply 1 ~ 4mA
    Operating Temperature 0°C ~ 70°C Package / Case 48-VFQFN Exposed Pad
    Supplier Device Package 48-SQFN (6x6) Base Product Number LAN7800
    Manufacturer Microchip Product Category USB Interface IC
    RoHS Details Product USB Controllers
    Type Bridge, USB to Ethernet Standard USB 3.1
    Brand Microchip Technology Moisture Sensitive Yes
    Product Type USB Interface IC Factory Pack Quantity 3000
    Subcategory Interface ICs

    Service Policies and Others

    After-Sales & Settlement Related

    payment Payment

    We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

    If you have specific preferences or requirements for payment channels, please contact our sales team. 

    customers are required to pay all possible fees, including sales tax,customs fees, etc.

    shipping Shipping And Packing
    Shipping Method

    Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

    Packing

    AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

    warranty Warranty & Returns

    Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

    We promise to provide 365 days quality assurance service for all our products.

    If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

    Reviews

    You need to log in to reply. Sign In | Sign Up

    Availability: 3012 pieces

    Qty. Unit Price(USD) Ext. Price
    1+ $13.189 $13.19
    10+ $12.493 $124.93
    30+ $11.283 $338.49
    100+ $9.492 $949.20

    The prices below are for reference only.