This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

L6564DTR

Power Factor Correction - PFC Transition Mode PFC 5mA 90uA 1.5% Ref

Inquiry Add To Bom

L6564DTR General Description

The L6564 device is a current mode PFC controller operating in transition mode (TM) and represents the compact version of the L6563S device as it embeds the same driver, reference and control stages in a very compact 10-pin SSOP10 package.The highly linear multiplier, along with a special correction circuit that reduces crossover distortion of the mains current, allows wide range mains operation with an extremely low THD even over a large load range.The output voltage is controlled by means of a voltage mode error amplifier and an accurate (1% at TJ= 25 °C) internal voltage reference. The loop stability is optimized by the voltage feed-forward function (1/V2correction), which in this IC uses a proprietary technique that considerably improves line transient response as well in case of mains both drops and surges (“bidirectional”).In addition to overvoltage protection able to control the output voltage during transient conditions, the IC also provides protection against feedback loop failures or erroneous settings. Other on-board protection functions allow brownout conditions and boost inductor saturation to be safely handled.The totem-pole output stage, capable of 600 mA source and 800 mA sink current, is suitable for the high power MOSFET or IGBT drive. This, combined with the other features and the possibility to operate with ST's proprietary fixed-off-time control, makes the device an excellent solution for SMPS up to 400 W that require compliance with the EN61000-3-2 and JEITA-MITI standards.50 W wide-range high power factor flyback conver.L6564 transiotion mode PFC evaluation board.

STMicroelectronics, Inc Inventory

Key Features

  • Fast “bidirectional” input voltage feed-forward (1/V2correction)
  • Accurate adjustable output overvoltage protection
  • Protection against feedback loop disconnection (latched shutdown)
  • Inductor saturation protection
  • AC brownout detection
  • Low (≤100 μA) start-up current
  • 6 mA max. operating bias current
  • 1% (at TJ= 25 °C) internal reference voltage
  • -600/+800 mA totem pole gate driver with active pull-down during UVLO
  • SSOP10 package
STMicroelectronics, Inc Original Stock
STMicroelectronics, Inc Inventory

Specifications

Category Integrated Circuits (ICs)Power Management (PMIC)PFC (Power Factor Correction) Mfr STMicroelectronics
Series - Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status Active Mode Discontinuous (Transition)
Frequency - Switching - Current - Startup 90 µA
Voltage - Supply 10.3V ~ 22.5V Operating Temperature -25°C ~ 125°C
Mounting Type Surface Mount Package / Case 10-SOP (0.154", 3.90mm Width)
Supplier Device Package 10-SSOP Base Product Number L6564

Service Policies and Others

After-Sales & Settlement Related

payment Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

If you have specific preferences or requirements for payment channels, please contact our sales team. 

customers are required to pay all possible fees, including sales tax,customs fees, etc.

shipping Shipping And Packing
Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

warranty Warranty & Returns

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Ratings and Reviews

More
A
A**n 12/19/2022

Delivered quickly, recommend

13
M
M**d 03/03/2022

Got all the whole, it was 11 days, ok

7
Z
Z**y 11/07/2021

It is the bigger version but good

19
N
N**h 03/19/2021

Count laziness, it was a month and a half, in the work has not yet checked, but the description corresponds

3

Reviews

You need to log in to reply. Sign In | Sign Up