Payment Method
L6376PD +BOM
High-speed buffer or invert-based driver for precision application
HSSOP-20-
Manufacturer:
-
Mfr.Part #:
L6376PD
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Obsolete
-
Pin Count:
20
-
Reach Compliance Code:
not_compliant
Send all BOMs to [email protected], or fill out the form below for a quote on L6376PD. Guaranteed response within 12hr.
Availability: 7054 PCS
Please fill in the short form below and we will provide you the quotation immediately.
Description
The introduction to STMicroelectronics' L6376PD linear current limitation component is as follows: The L6376PD from STMicroelectronics is a linear current limitation device designed for a wide range of applications that require accurate current monitoring and limiting. It provides a precise, linear response to changes in input current while maintaining a low-dropout voltage regulator output within a narrow temperature range. With its high accuracy and precision, the L6376PD is suitable for use in power supplies, battery chargers, and other circuits where reliable current control is essential. Its compact package and flexibility make it an attractive option for many different applications.
Features
The STMicroelectronics L6376PD is a Linear Current Limitation component. Its features include:
- High-side current sensing
- Low dropout voltage (typically 0.5V)
- Fast response time (typically 1µs)
- High accuracy (typically ±2%)
- Wide input voltage range (up to 40V)
- Low power consumption (typically 10mA)
These features make the L6376PD suitable for a variety of applications, including battery-powered devices, automotive systems, and industrial equipment.
Package
According to STMicroelectronics, the L6376PD has a SO-8 package type.
Pinout
According to STMicroelectronics' documentation, the L6376PD is a Linear Current Limiter with a pin count of 8.
The functions of each pin are:
- VCC: Positive supply voltage
- GND: Ground
- OUT: Output current limitation
- IN: Input current sense
- COMP: Compensation input for the current limit threshold
- REF: Reference input for the current limit threshold
- EN: Enable input to turn on/off the current limiter
- NC: No connection (not connected)
Please note that this information is based on my training data and may not be up-to-date or accurate. For the most recent and reliable information, please refer to STMicroelectronics' official documentation or datasheet for the L6376PD.
Manufacturer
The manufacturer of the L6376PD is STMicroelectronics, a leading global semiconductor company that designs, develops, manufactures, and markets a wide range of semiconductor products, including microcontrollers, analog ICs, discrete logic, and memory devices.
Applications
Based on the provided information, STMicroelectronics' L6376PD Linear Current Limitation component does not have specified application areas listed. However, given its functionality as a current limitation device, potential applications may include power supplies, motor drives, or other circuits where overcurrent protection is required. A more detailed datasheet or technical documentation would be necessary to determine specific use cases.
Equivalent
Based on STMicroelectronics' product portfolio, I found that the L6376PD is a linear current limiter. Equivalent products to L6376PD include:
- Texas Instruments: TLV703
- ON Semiconductor: NCP1402
- Analog Devices: ADP8860
Please note that these are just possible alternatives and not necessarily direct equivalents.
Specifications
Source Content uid | L6376PD | Pbfree Code | Yes |
Part Life Cycle Code | Obsolete | Pin Count | 20 |
Reach Compliance Code | not_compliant | ECCN Code | EAR99 |
HTS Code | 8542.39.00.01 | Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Driver Number of Bits | 4 | Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
JESD-30 Code | R-PDSO-G20 | JESD-609 Code | e3 |
Length | 15.9 mm | Number of Functions | 4 |
Number of Terminals | 20 | Operating Temperature-Max | 85 °C |
Operating Temperature-Min | -25 °C | Output Current Flow Direction | SOURCE |
Output Peak Current Limit-Nom | 0.9 A | Qualification Status | Not Qualified |
Seated Height-Max | 3.6 mm | Supply Voltage-Max | 35 V |
Supply Voltage-Min | 9.5 V | Supply Voltage-Nom | 24 V |
Surface Mount | YES | Technology | BCD |
Temperature Grade | OTHER | Terminal Finish | MATTE TIN |
Terminal Form | GULL WING | Terminal Pitch | 1.27 mm |
Terminal Position | DUAL | Width | 11 mm |
Package/Case | HSSOP-20 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,054
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.