This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


Ethernet Switch 5-Port 100Mbps Automotive 128-Pin LQFP Tray

Inquiry Add To Bom

KSZ8895MLXI General Description

The KSZ8895MQX/RQX/FQX/ML is a highly-integrated, Layer 2 managed, five-port switch with numerous features designed to reduce system cost. The KSZ8895 is Automotive qualified (AEC-Q100).

The KSZ8895 family was designed to be used in for cost sensitive 10/100Mbps five-port switch systems with low power requirements. Combining on-chip termination and internal LDO regulator help minimize system cost.The KSZ8895 family supports high-performance memory bandwidth and shared memory-based switch fabric with non-blocking configuration.

The KSZ8895family also includes an extensive feature set, including: power management, programmable rate limit and priority ratio, tag/port-based VLAN, packets filtering, four queue QoS prioritization, management interfaces, and MIB counters.

The KSZ8895 family provides multiple CPU data interfaces to effectively address both current and emerging fast Ethernet applications when port 5 is configured to separate MAC5 with SW5-MII/RMII and PHY5 with P5-MII/RMII interfaces.The KSZ8895 family offers three configurations, providing the flexibility to meet different requirements:

  • KSZ8895MQX/ML has 5 10/100Base-T/TX transceivers, 1 SW5-MII and 1 P5-MII interface
  • KSZ8895RQX has 5 10/100Base-T/TX transceivers, 1 SW5-RMII and 1 P5-RMII interface
  • KSZ8895FQX has 4 10/100Base-T/TX transceivers on Ports 1, 2, 3 and 5 (port 3 can be set to the fiber mode). 1 100Base-FX transceivers on Port 4. 1 SW5-MII and 1 P5-MII interface

All registers of MACs and PHYs units can be managed by the SPI or the SMI interface. MIIM registers can be accessed through the MDC/MDIO interface.

EEPROM can set all control registers for the unmanaged mode.KSZ8895MQX/RQX/FQX are 128-pin PQFP package. KSZ8895ML is 128-pin LQFP package.Microchip's complimentary and confidential LANCheckĀ® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

**Please note: KSZ8895 part numbers ending/containing "A" are not recommended for new designs**i.e. For new designs, instead of using KSZ8895MQXIA, please use KSZ8895MQXI.

Microchip Technology, Inc Inventory

Key Features

  • Advanced Switch Features
  • IEEE 802.1q VLAN support for up to 128 active VLAN groups (full-range 4096 of VLAN IDs)
  • Static MAC table supports up to 32 entries
  • VLAN ID tag/untag options, per port basis
  • Comprehensive Configuration Register Access
  • Serial management interface (MDC/MDIO) to all PHYs registers and SMI interface (MDC/MDIO) to all registers
  • High-speed SPI (up to 25MHz) and I2C master Interface to all internal registers
  • I/0 pins strapping and EEPROM to program selective registers in unmanaged switch mode
  • QoS/CoS Packet Prioritization Support
  • Per port, 802.1p and DiffServ-based
  • 1/2/4-queue QoS prioritization selection
  • Programmable weighted fair queuing for ratio control
  • Integrated 5-Port 10/100 Ethernet Switch
  • New generation switch with five MACs and five PHYs that are fully compliant with the IEEE 802.3u standard
  • PHYs designed with patented enhanced mixed-signal technology
  • Non-blocking switch fabric assures fast packet delivery by utilizing a 1K MAC address lookup table and a store-and-forward architecture
  • Switch Monitoring Features
  • Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII
  • MIB counters for fully-compliant statistics gathering 34 MIB counters per port
  • Loop-back support for MAC, PHY, and remote diagnostic of failure
  • Low-Power Dissipation
  • Full-chip software power-down and per port software power down
  • Energy-detect mode support <100mW full-chip power consumption when all ports have no activity
Microchip Technology, Inc Original Stock


Category Integrated Circuits (ICs)InterfaceControllers Mfr Microchip Technology
Series - Package Tray
Product Status Active Digi-Key Programmable Not Verified
Protocol Ethernet Function Switch
Interface MII Standards IEEE 802.3, 10/100 Base-T/TX PHY
Voltage - Supply 1.14V ~ 1.32V, 1.71V ~ 1.89V, 2.375V ~ 2.625V, 3.135V ~ 3.465V Current - Supply 107mA
Operating Temperature -40°C ~ 85°C (TA) Package / Case 128-LQFP
Supplier Device Package 128-LQFP (14x14)


Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail


We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram


Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD


  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray


You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of KSZ8895MLXI?

    The lifespan of KSZ8895MLXI depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of KSZ8895MLXI?

    You can find it with PDF Datasheet for KSZ8895MLXI on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of KSZ8895MLXI?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of KSZ8895MLXI or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.