This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

ISL6115CBZA

Hot Swap Voltage Controllers W/ANNEAL 8LD +12V HOT PLUG CNTRLR

Inquiry Add To Bom

ISL6115CBZA General Description

This family of fully featured hot swap power controllers targets applications in the +2. 5V to +12V range. The ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3. 3V and the ISL6120 for +2. 5V control applications. Each has a hard wired undervoltage (UV) monitoring and reporting threshold level approximately 80% of the aforementioned voltage. The ISL6115 has an integrated charge pump allowing control of up to +16V rails using an external N-Channel MOSFET whereas the other devices utilize the +12V bias voltage to fully enhance the N-Channel pass FET. All ICs feature programmable overcurrent (OC) detection, current regulation (CR) with time delay to latch-off and soft-start. The current regulation level is set by 2 external resistors; RISET sets the CR Vth and the other is a low ohmic sense element across, which the CR Vth is developed. The CR duration is set by an external capacitor on the CTIM pin, which is charged with a 20µA current once the CR Vth level is reached. If the voltage on the CTIM capacitor reaches 1. 9V the IC then quickly pulls down the GATE output latching off the pass FET. This family although designed for high side switch control the ISL6116, ISL6117, ISL6120 can also be used in a low side configuration for control of much higher voltage potentials.

Key Features

HOT SWAP Single Power Distribution Control (ISL6115 for +12V, ISL6116 for +5V, ISL6117 for +3.3V and ISL6120 for +2.5V)

Overcurrent Fault Isolation

Programmable Current Regulation Level

Programmable Current Regulation Time to Latch-Off

Rail-to-Rail Common Mode Input Voltage Range (ISL6115)

Internal Charge Pump Allows the Use of N-Channel MOSFET for +12V Control (ISL6115)

Undervoltage and Overcurrent Latch Indicators

Adjustable Turn-On Ramp

Protection During Turn-On

Two Levels of Overcurrent Detection Provide Fast Response to Varying Fault Conditions

1s Response Time to Dead Short

Pb-Free Available (RoHS Compliant)

Application

Power Distribution Control

Hot Plug Components and Circuit

Specifications

Manufacturer Renesas Electronics Product Category Hot Swap Voltage Controllers
RoHS Details Product Controllers & Switches
Current Limit Programmable Supply Voltage - Max 13.8 V
Supply Voltage - Min 10.2 V Number of Channels 1 Channel
Operating Supply Current 5 mA Minimum Operating Temperature 0 C
Maximum Operating Temperature + 85 C Mounting Style SMD/SMT
Package / Case SOIC-8 Power Fail Detection Yes
Brand Renesas / Intersil Height 0 mm
Length 4.9 mm Operating Supply Voltage 12 V
Product Type Hot Swap Voltage Controllers Series ISL6115
Factory Pack Quantity 98 Subcategory PMIC - Power Management ICs
Type Positive Voltage Width 3.9 mm
Unit Weight 0.002540 oz

Shipping

Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail

Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram

Guarantees

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD

    ESD

  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray

Reviews

You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of ISL6115CBZA?

    The lifespan of ISL6115CBZA depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of ISL6115CBZA?

    You can find it with PDF Datasheet for ISL6115CBZA on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of ISL6115CBZA?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of ISL6115CBZA or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.