This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


Driver 2.5A 4-OUT High and Low Side Full Brdg/Half Brdg/H Brdg Non-Inv Automotive 16-Pin SOIC N Tube

Inquiry Add To Bom

HIP4082IBZ General Description

The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. Similar to the HIP4081, it has a flexible input protocol for driving every possible switch combination except those which would cause a shoot-through condition. The HIP4082's reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5µs) making it ideal for switching frequencies up to 200kHz. The HIP4082 does not contain an internal charge pump, but does incorporate non-latching level-shift translation control of the upper drive circuits. This set of features and specifications is optimized for applications where size and cost are important. For applications needing higher drive capability the HIP4080A and HIP4081A are recommended.

hip4082ibz hip4082ibz

Key Features

  • Independently Drives 4 N-Channel FET in Half Bridge or Full Bridge Configurations
  • Bootstrap Supply Max Voltage to 95VDC
  • Drives 1000pF Load in Free Air at 50°C with Rise and Fall Times of Typically 15ns
  • User-Programmable Dead Time (0.1 to 4.5µs)
  • DIS (Disable) Overrides Input Control and Refreshes Bootstrap Capacitor when Pulled Low
  • Input Logic Thresholds Compatible with 5V to 15V Logic Levels
  • Shoot-Through Protection
  • Undervoltage Protection
  • Pb-free Available
hip4082ibz hip4082ibz
hip4082ibz hip4082ibz


Category Integrated Circuits (ICs)Power Management (PMIC)Full Half-Bridge Drivers Mfr Renesas Electronics America Inc
Series - Package Tube
Product Status Active Output Configuration Half Bridge, Full Bridge
Applications DC Motors, General Purpose Interface Logic, PWM
Load Type Capacitive and Resistive Technology N-Channel MOSFET
Rds On (Typ) - Current - Output / Channel -
Current - Peak Output 1.4A Voltage - Supply 8.5V ~ 15V
Voltage - Load 5V ~ 15V Operating Temperature -55°C ~ 150°C (TJ)
Features Bootstrap Circuit Fault Protection -
Mounting Type Surface Mount Package / Case 16-SOIC (0.154", 3.90mm Width)
Supplier Device Package 16-SOIC Base Product Number HIP4082
Manufacturer Renesas Electronics Product Category Gate Drivers
RoHS Details Product Half-Bridge Drivers
Type High-Side, Low-Side Mounting Style SMD/SMT
Number of Drivers 4 Driver Number of Outputs 4 Output
Output Current 1.25 A Supply Voltage - Min 8.5 V
Supply Voltage - Max 15 V Rise Time 9 ns
Fall Time 9 ns Minimum Operating Temperature - 55 C
Maximum Operating Temperature + 125 C Brand Renesas / Intersil
Height 0 mm Length 9.9 mm
Moisture Sensitive Yes Product Type Gate Drivers
Factory Pack Quantity 960 Subcategory PMIC - Power Management ICs
Width 3.9 mm


Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail


We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram


Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD


  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray


You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of HIP4082IBZ?

    The lifespan of HIP4082IBZ depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of HIP4082IBZ?

    You can find it with PDF Datasheet for HIP4082IBZ on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of HIP4082IBZ?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of HIP4082IBZ or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.