This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

DSPIC33EV256GM104-I/PT Images are for reference only,

See Technical Specifications

DSPIC33EV256GM104-I/PT

MCU 16-bit dsPIC CISC 256KB Flash 5V 44-Pin TQFP Tray

Manufacturer: Microchip Technology, Inc
Mfr.Part #: DSPIC33EV256GM104-I/PT
Datasheet: DSPIC33EV256GM104-I/PT Datasheet (PDF)
Package/Case: TQFP-44
Product Type: Embedded Processors & Controllers
RoHS:
Lifecycle: Active

Inquiry Add To Bom

DSPIC33EV256GM104-I/PT General Description

Microchip’s dsPIC33EV family of digital signal controllers (DSCs) features a 5V 70 MIPS dsPIC^® DSC core with enhanced on-chip features and is ideal for operating in harsh environments such as appliances, industrial and automotive applications. The 5V dsPIC33EV family comes with rich peripheral integration which includes CAN, SENT, High Speed PWMs, OP Amps and Error Correcting Code Flash for increased reliability and safety. The dsPIC33EV family of devices enable the design of high-performance, precision motor control systems that are more energy efficient. They can be used to control BLDC, permanent magnet synchronous, AC induction and stepper motors. These devices are ideal for high-performance general purpose, Touch, advanced sensor interfacing and control applications in automotive, industrial, consumer and medical segments.

The functional safety ready dsPIC33EVXXXGM00X/10X family has many features that help simplify achieving ISO 26262 functional safety compliance of your safety-critical designs. The family offers:

• Functional Safety Manual and FMEDA report

• MPLAB XC16 Functional Safety Compiler available with registration

• Learn more about our functional safety capabilities including hardware, software, and supporting collateral

Key Features

Operating Conditions
4.5V to 5.5V, -40ºC to +85ºC, DC to 70 MIPS
4.5V to 5.5V, -40ºC to +125ºC, DC to 60 MIPS
4.5V to 5.5V, -40ºC to +150ºC, DC to 40 MIPS
dsPIC33E Core
Code-Efficient (C and Assembly) Architecture
Two 40-Bit Wide Accumulators
Single-Cycle (MAC/MPY) with Dual Data Fetch
Single-Cycle, Mixed-Sign MUL plus Hardware Divide
32-Bit Multiply Support
Provides a boot Flash segment in addition to the existing general Flash segment
Error Code Correction (ECC) for Flash
Added Two Alternate Register Sets for Fast Context Switching
Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)
High-Speed PWM
Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources
Dead Time for Rising and Falling Edges
8.3 ns PWM Resolution at 60 MIPS,
16.6 ns Center-Aligned mode at 60 MIPS
PWM support DC/DC, AC/DC, inverters, Power Factor Correction (PFC) and lighting
PWM support Brushless Direct Current (BLDC), Permanent Magnet Synchronous Motor (PMSM), AC Induction Motor (ACIM), Switched Reluctance Motor (SRM)
Programmable Fault inputs
Flexible trigger configurations for Analog-to-Digital conversion
Independent Time Base
Supports PWM lock, PWM output chopping and dynamic phase shifting
Integrated Analog Features
ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
Up to 36 analog inputs
Flexible and Independent ADC Trigger Sources
Up to Four Op Amp/Comparators with Direct Connection to the ADC module:
Additional dedicated comparator and 7-bit Digital-to-Analog Converter (DAC)
Programmable references with 128 voltage points
Programmable blanking and filtering
Charge Time Measurement Unit
Supports mTouch™ capacitive touch sensing
Provides high-resolution time measurement (1 ns)
On-chip temperature measurement
Temperature sensor diode
Multiple sources of edge input triggers
Timers/Output Compare/Input Capture
Up to nine general purpose timers
Five 16-bit or up to two 32-bit timers/counters, Timer3 can provide ADC trigger
Oscillator Frequency Monitoring through CTMU
Four Output Capture modules configurable as timers/counters
Four Input Capture modules
Communication Interfaces
CAN module with 32 buffers, 16 filters and three masks
Support for LIN/J2602 bus support and IrDA®
High and low speed (SCI)
25 Mbps data rate without PPS used
One I2C™ module (up to 1 Mbaud) with SMBus Support
Two SENT J2716 (Single Edge Nibble Transmission-Transmit/Receive) module for Automotive Applications
Direct Memory Access (DMA)
4-Channel DMA with User-Selectable Priority Arbitration
Universal Asynchronous Receiver/Transmitter (UART), Serial Peripheral Interface (SPI), ADC, Input Capture, Output Compare
Qualification and Class B Support
AEC-Q100 Grade 1 (-40ºC to +125ºC)
AEC-Q100 Grade 0 (-40ºC to +150ºC)
Class B Safety Library, IEC 60730
Functional Safety Features
Backup FRC
Windowed WDT uses LPRC
Windowed Deadman Timer uses System Clock (System Windowed Watchdog Timer)
H/W Clock Monitor Circuit
Dedicated PWM Fault Pin
Lockable Clock Configuration
Functional Safety support (ISO26262)
ASIL-B focused applications
FMEDA and Safety manual
XC16 Functional Safety Compiler
Functional Safety hardware features
Flash with Error Correction Code (ECC)
CodeGuard™ Memory Protection
On-chip Regulator for CPU
Backup FRC and redundant clock sources
Fail Safe Clock Monitor
Windowed Watchdog Timer (WDT)
Windowed Deadman Timer (DMT)
Oscillator Frequency Monitoring through CTMU (OSCI, SYSCLK, FRC, BFRC, LPRC)
Cyclical Redundancy Check (CRC)
BOR and POR
Analog peripherals redundancies
Illegal Opcode Detection
PWM Lock and Dedicated PWM Fault Pin
Internal Loopback to test communication peripherals and IO ports
SFR and Configuration Locks
Address Trap
Math Error Trap
Redundant data storage for Flash-based Configuration bits and Peripheral Pin Select (PPS) Configuration bits

Microchip Technology, Inc Original Stock

Specifications

Category	Integrated Circuits (ICs)EmbeddedMicrocontrollers	Mfr	Microchip Technology
Series	dsPIC™ 33EV, Functional Safety (FuSa)	Package	Tray
Product Status	Active	Core Processor	dsPIC
Core Size	16-Bit	Speed	70 MIPs
Connectivity	CANbus, I²C, IrDA, LINbus, SPI, UART/USART	Peripherals	Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
Number of I/O	35	Program Memory Size	256KB (85.5K x 24)
Program Memory Type	FLASH	EEPROM Size	-
RAM Size	16K x 8	Voltage - Supply (Vcc/Vdd)	4.5V ~ 5.5V
Data Converters	A/D 24x10/12b	Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)	Mounting Type	Surface Mount
Package / Case	44-TQFP	Supplier Device Package	44-TQFP (10x10)
Base Product Number	DSPIC33EV256GM104

Shipping

Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

DHL
Fedex
UPS
EMS
Registered Air Mail

Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

Wire Transfer
Paypal
Credit Card
Western Union
Money Gram

Guarantees

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

ESD
Tape and Reel
Cut Tape
Tube or Tray

Reviews

You need to log in to reply. Sign In | Sign Up

Recommended For You
New Products

MPC8572CLVTAULD

NXP Semiconductor

5962-8861901ZA

Texas Instruments, Inc

R5F10PPFYFB#X5

Renesas Technology Corp

PIC16LF73T-I/SS

Microchip Technology, Inc

S912XHZ512F1VAL

NXP Semiconductor

SAF-XC866-4FRA BE

Infineon Technologies Corporation

STM8S005K6T6C

R5F51307ADFK#50

Renesas Electronics

EFM32GG980F1024-QFP100

DSP56857BU120

DSPIC33FJ64MC508-E/PT

Buying Guide

What is the lifespan of DSPIC33EV256GM104-I/PT?
The lifespan of DSPIC33EV256GM104-I/PT depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.
Where can I find the full specification of DSPIC33EV256GM104-I/PT?
You can find it with PDF Datasheet for DSPIC33EV256GM104-I/PT on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.
How to check the quality of DSPIC33EV256GM104-I/PT?
Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.
Can I purchase samples for testing?
Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.
Where can I check the delivery after the order is completed?
Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.
Where to view my order of DSPIC33EV256GM104-I/PT or my history order record?
You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.