This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


LVDS Serializer 4160Mbps Automotive 32-Pin VQFN EP T/R

Inquiry Add To Bom

DS90UB953TRHBTQ1 General Description

The DS90UB953-Q1 serializer is part of TI’s FPD-Link III device family designed to support high-speed raw data sensors including 2.3MP imagers at 60-fps and as well as 4MP, 30-fps cameras, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The chip delivers a 4.16-Gbps forward channel and an ultra-low latency, 50-Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The DS90UB953-Q1 features advanced data protection and diagnostic features to support ADAS and autonomous driving. Together with a companion deserializer, the DS90UB953-Q1 delivers precise multi-camera sensor clock and sensor synchronization.

The DS90UB953-Q1 is fully AEC-Q100 qualified with a -40°C to 105°C wide temperature range.The serializer comes in a small 5-mm × 5-mm VQFN package for space-constrained sensor applications.

Texas Instruments, Inc Inventory

Key Features

  • AEC-Q100 qualified for automotive applications:
  • Device temperature Grade 2: –40°C to +105°C ambient operating temperature
  • ISO 10605 and IEC 61000-4-2 ESD compliant
  • Power-over-Coax (PoC) compatible transceiver
  • 4.16-Gbps grade serializer supports high-speed sensors including full HD 1080p 2.3MP 60-fps and 4MP 30-fps imagers
  • D-PHY v1.2 and CSI-2 v1.3 compliant system interface
  • Up to 4 data lanes at 832 Mbps per each lane
  • Supports up to four virtual channels
  • Precision multi-camera clocking and synchronization
  • Flexible programmable output clock generator
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm, and line fault detection
  • Supports Single-ended coaxial or shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8-V power supply
  • Low (0.25 W typical) power consumption
  • Functional Safety-Capable
  • Documentation available to aid ISO 26262 system design
  • Compatible with DS90UB954-Q1, DS90UB964-Q1, DS90UB962-Q1, DS90UB936-Q1, DS90UB960-Q1, DS90UB934-Q1, and DS90UB914A-Q1 deserializers
  • Wide temperature range: –40°C to 105°C
  • Small 5-mm × 5-mm VQFN package and PoC solution size for compact camera module designs
Texas Instruments, Inc Original Stock
Texas Instruments, Inc Inventory


Category Integrated Circuits (ICs)InterfaceSerializers, Deserializers Mfr Texas Instruments
Series Automotive, AEC-Q100 Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status Active Function Serializer
Data Rate 4.16Gbps Input Type FPD-Link III, LVDS
Output Type CSI-2, MIPI Number of Inputs 1
Number of Outputs 1 Voltage - Supply 1.71V ~ 1.89V
Operating Temperature -40°C ~ 105°C Mounting Type Surface Mount, Wettable Flank
Package / Case 32-VFQFN Exposed Pad Supplier Device Package 32-VQFN (5x5)
Base Product Number DS90UB953


Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Delivery Time

The delivery time is usually within 2-7 days, depending on the logistics provider and the area of delivery.

The following are the estimated delivery times of some logistics service providers.

  • DHL

  • Fedex

  • UPS

  • EMS

  • Registered Air Mail


We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

Checks and other instruments are not supported to pay for orders and customers are required to pay all possible fees, including sales tax,
customs fees, etc.

  • Wire Transfer

  • Paypal

  • Credit Card

  • Western Union

  • Money Gram


Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
  • ESD


  • Tape and Reel

    Tape and Reel

  • Cut Tape

    Cut Tape

  • Tube or Tray

    Tube or Tray


You need to log in to reply. Sign In | Sign Up

Buying Guide

  • What is the lifespan of DS90UB953TRHBTQ1?

    The lifespan of DS90UB953TRHBTQ1 depends on various factors such as the quality of materials used, operating conditions, and the manufacturer's recommended usage time. The datasheet provided by the manufacturer specifies the expected lifespan of the product.

  • Where can I find the full specification of DS90UB953TRHBTQ1?

    You can find it with PDF Datasheet for DS90UB953TRHBTQ1 on this page. If it is not available, you can contact Avaq at [email protected] to inquire about the Datasheet for this part.

  • How to check the quality of DS90UB953TRHBTQ1?

    Avaq has separate quality services with common quality inspection equipment for testing items, you can also fill out a sample form, our team will get in touch with you within 24 HOURS.

  • Can I purchase samples for testing?

    Avaq offers free samples for customers to test. This can often help you determine whether the chip or component meets your needs.

  • Where can I check the delivery after the order is completed?

    Once the order is completed, you will receive an order confirmation email containing a tracking number from AVAQ, then you can track the delivery by yourself.

  • Where to view my order of DS90UB953TRHBTQ1 or my history order record?

    You could view all of your orders by logging in or registering AVAQ account. Log in or Register an account now.