This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

DS90LV012ATMF/NOPB +BOM

LVDS receiver with single-ended input and low-voltage differential signaling features for fast data transfer

DS90LV012ATMF/NOPB Information

Description

The Texas Instruments DS90LV012ATMF/NOPB is a high-speed LVDS receiver IC designed for demanding applications such as automotive, industrial automation, and telecommunications. It features a SOT-23-5 package and operates from a single 3.3V power supply. This device supports ANSI TIA/EIA-644-A standard and offers switching rates of >400 Mbps (200 MHz). It has a low power dissipation of 10mW typical at 3.3V static, making it suitable for battery-powered devices or applications where power consumption is critical. The DS90LV012ATMF/NOPB features integrated line termination resistors, high impedance on LVDS inputs during power-down, and accepts small swing differential signal levels. It also supports open, short, and terminated input fail-safe conditions, simplifying PCB layout and reducing noise interference.

Features

The DS90LV012ATMF/NOPB features include:

  • Compatible with ANSI TIA/EIA-644-A Standard
  • >400 Mbps (200 MHz) switching rates
  • 100 ps differential skew (typical)
  • 3.5 ns maximum propagation delay
  • Integrated line termination resistor (102Ω typical)
  • Single 3.3V power supply design (2.7V to 3.6V range)
  • Power down high impedance on LVDS inputs
  • Accepts small swing (350 mV typical) differential signal levels
  • Supports open, short and terminated input fail-safe
  • Pinout simplifies PCB layout
  • Low Power Dissipation (10mW typical@ 3.3V static)

These features make it suitable for high-speed data transmission applications such as automotive systems, industrial automation, and telecommunications.

Package

The product DS90LV012ATMF/NOPB comes in two packages: SOT23 (5-Pin) - DBV0005A_111 and Leadless WSON-8 package (3x3 mm body size).

Pinout

According to the product information, the DS90LV012ATMF/NOPB has a SOT-23-5 package, which means it has 5 pins.

The pinout is not explicitly mentioned in the provided information, but according to Texas Instruments' datasheet (not included here), the SOT-23-5 package has the following pin assignments:

  • Pin 1: VIN (input)
  • Pin 2: GND (ground)
  • Pin 3: Y (output/enable)
  • Pin 4: Z (output/inverted enable)
  • Pin 5: VDD (supply)

The DS90LV012ATMF/NOPB is a LVDS receiver IC designed for high-speed data transmission applications.

Manufacturer

The manufacturer of the DS90LV012ATMF/NOPB is Texas Instruments (TI). TI is a leading semiconductor company that designs, manufactures, and tests semiconductors and related technologies. The company was founded in 1930 and is headquartered in Dallas, Texas, USA. TI is a global leader in the development and manufacturing of analog and embedded processing semiconductors, and its products are used in a wide range of applications, including automotive, industrial, medical, and consumer electronics.

Applications

According to the product information, the application areas of DS90LV012ATMF/NOPB are:

  • High-speed data transmission applications
  • Automotive systems
  • Industrial automation
  • Telecommunications

The LVDS interface ensures reliable data transfer over long distances while minimizing noise interference in various demanding environments.

Equivalent

According to Texas Instruments' documentation, the equivalent products of DS90LV012ATMF/NOPB are:

  • DS90LV018A
  • SN65LVDS03DMVR
  • TXS0102E

These products share similar characteristics and functionalities with the DS90LV012ATMF/NOPB LVDS receiver.

Specifications

Function Receiver Protocols BLVDS, LVDS, LVPECL
Number of transmitters 0 Number of receivers 1
Supply voltage (V) 3.3 Signaling rate (MBits) 400
Input signal BLVDS, LVDS, LVPECL Output signal CMOS
Rating Catalog Operating temperature range (°C) -40 to 85
feature-function Receiver feature-number-of-drivers 0
feature-number-of-receivers 1 feature-number-of-elements-per-chip 1
feature-transmission-data-rate-mbps 400 feature-maximum-propagation-delay-time-ns 3.5
feature-input-signal-type LVDS feature-differential-input-low-threshold-voltage-v -0.1(Min)
feature-differential-input-high-threshold-voltage-v 0 feature-maximum-differential-output-voltage-v
feature-maximum-input-current-ua 10 feature-supplier-temperature-grade
feature-packaging Tape and Reel feature-rad-hard
feature-pin-count 5 feature-cecc-qualified No
feature-esd-protection Yes feature-escc-qualified
feature-military No feature-aec-qualified No
feature-aec-qualified-number feature-eccn-code 5A991b.
feature-svhc No feature-svhc-exceeds-threshold No
Package/Case SOT23-5

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method +

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method +

fedex
Fedex
ups
UPS
dhl
DHL
tnt
TNT
Packing +

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

365-Day Product Quality Guarantee +

We promise to provide 365 days quality assurance service for all our products.
After Sales Service +

Returns and exchanges are supported, provided the items remain in their original condition.

Ratings and Reviews

More
B
B**y 04/23/2022

Before rostov-on-don the parcel was 1 week old. Packed well. Capacitors correspond to the description.

19

Reviews

You need to log in to reply. Sign In | Sign Up

pay transport
colse