This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

CC2640F128RGZT

Bluetooth v4.1 (BLE) SMART SOC Class II Medical 48-Pin VQFN EP T/R

Inquiry Add To Bom

CC2640F128RGZT General Description

The CC2640 device is a wireless MCU targeting Bluetooth applications.

The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.

The CC2640 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2640 device is ideal for a wide range of applications where long battery lifetime, small form factor, and ease of use is important.

The Bluetooth Low Energy controller is embedded into ROM and runs partly on an ARM Cortex-M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.

The Bluetooth stack is available free of charge from www.ti.com.

Texas Instruments, Inc Inventory

Key Features

  • Microcontroller
    • Powerful ARM? Cortex?-M3
    • EEMBC CoreMark? Score: 142
    • Up to 48-MHz Clock Speed
    • 128KB of In-System Programmable Flash
    • 8KB of SRAM for Cache
    • 20KB of Ultralow-Leakage SRAM
    • 2-Pin cJTAG and JTAG Debugging
    • Supports Over-The-Air Upgrade (OTA)
  • Ultralow-Power Sensor Controller
    • Can Run Autonomous From the Rest of the System
    • 16-Bit Architecture
    • 2KB of Ultralow-Leakage SRAM for Code and Data
  • Efficient Code Size Architecture, Placing Drivers, Bluetooth? Low Energy Controller, and Bootloader in ROM
  • RoHS-Compliant Packages
    • 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
    • 5-mm × 5-mm RHB VQFN32 (15 GPIOs)
    • 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
  • Peripherals
    • All Digital Peripheral Pins Can Be Routed to Any GPIO
    • Four General-Purpose Timer Modules
      (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
    • 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
    • Continuous Time Comparator
    • Ultralow-Power Analog Comparator
    • Programmable Current Source
    • UART
    • 2× SSI (SPI, MICROWIRE, TI)
    • I2C
    • I2S
    • Real-Time Clock (RTC)
    • AES-128 Security Module
    • True Random Number Generator (TRNG)
    • 10, 15, or 31 GPIOs, Depending on Package Option
    • Support for Eight Capacitive-Sensing Buttons
    • Integrated Temperature Sensor
  • External System
    • On-Chip internal DC-DC Converter
    • Very Few External Components
    • Seamless Integration With the SimpleLink? CC2590 and CC2592 Range Extenders
    • Pin Compatible With the SimpleLink CC13xx in 4-mm × 4-mm and 5-mm × 5-mm VQFN Packages
  • Low Power
    • Wide Supply Voltage Range
      • Normal Operation: 1.8 to 3.8 V
      • External Regulator Mode: 1.7 to 1.95 V
    • Active-Mode RX: 5.9 mA
    • Active-Mode TX at 0 dBm: 6.1 mA
    • Active-Mode TX at +5 dBm: 9.1 mA
    • Active-Mode MCU: 61 μA/MHz
    • Active-Mode MCU: 48.5 CoreMark/mA
    • Active-Mode Sensor Controller: 8.2 μA/MHz
    • Standby: 1 μA (RTC Running and RAM/CPU Retention)
    • Shutdown: 100 nA (Wake Up on External Events)
  • RF Section
    • 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 4.2 Specification
    • Excellent Receiver Sensitivity (–97 dBm for BLE), Selectivity, and Blocking Performance
    • Link budget of 102 dB for BLE
    • Programmable Output Power up to +5 dBm
    • Single-Ended or Differential RF Interface
    • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
      • ETSI EN 300 328 (Europe)
      • EN 300 440 Class 2 (Europe)
      • FCC CFR47 Part 15 (US)
      • ARIB STD-T66 (Japan)
  • Tools and Development Environment
    • Full-Feature and Low-Cost Development Kits
    • Multiple Reference Designs for Different RF Configurations
    • Packet Sniffer PC Software
    • Sensor Controller Studio
    • SmartRF? Studio
    • SmartRF Flash Programmer 2
    • IAR Embedded Workbench? for ARM
    • Code Composer Studio?

All trademarks are the property of their respective owners.

Texas Instruments, Inc Original Stock
Texas Instruments, Inc Inventory

Specifications

Category RF and WirelessRF Transceiver ICs Mfr Texas Instruments
Series SimpleLink™ Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status Active Digi-Key Programmable Not Verified
Type TxRx + MCU RF Family/Standard Bluetooth
Protocol Bluetooth v5.1 Modulation DSSS, O-QPSK, GFSK
Frequency 2.4GHz Data Rate (Max) 1Mbps
Power - Output 5dBm Sensitivity -97dBm
Memory Size 128kB Flash, 28kB SRAM Serial Interfaces I²C, I²S, JTAG, SPI, UART
GPIO 31 Voltage - Supply 1.8V ~ 3.8V
Current - Receiving 5.9mA ~ 6.1mA Current - Transmitting 6.1mA ~ 9.1mA
Operating Temperature -40°C ~ 85°C Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad Supplier Device Package 48-VQFN (7x7)
Base Product Number CC2640 Protocols Bluetooth low energy 5.1
Features LE 1M PHY Peripherals 1 UART, 12-bit ADC 8-channel, 2 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller
Rating Catalog Flash memory (kByte) 128
RAM (kByte) 20 Number of GPIOs 10, 15, 31
Security Cryptographic acceleration, Debug security, Device identity, Software IP protection Sensitivity (best) (dBm) -97
Operating temperature range (°C) -40 to 85 feature-packaging Tape and Reel
feature-pin-count 48 feature-supplier-package VQFN EP
feature-standard-package-name1 QFN feature-cecc-qualified No
feature-esd-protection Yes feature-military No
feature-aec-qualified No feature-aec-qualified-number
feature-auto-motive No feature-p-pap No
feature-eccn-code 5A992C feature-svhc No
feature-svhc-exceeds-threshold No

Service Policies and Others

After-Sales & Settlement Related

payment Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

If you have specific preferences or requirements for payment channels, please contact our sales team. 

customers are required to pay all possible fees, including sales tax,customs fees, etc.

shipping Shipping And Packing
Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

warranty Warranty & Returns

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Ratings and Reviews

More
J
J**n 04/25/2023

Articles bien reçus OK 100/100

4
L
L**s 09/08/2022

I made a national order and the parcel came to belarus in 36 days, not the fastest delivery time. Packed in a bag with a gun inside, everything came whole. Soldering neat and well washed. Didn't check. If there are problems, i will add feedback.

6
R
R**T 10/19/2021

Great Partner to work with !

17
O
O**a 10/01/2021

Delivery month, track was not. I found the parcel in the mailbox. Corresponds to the description. The order is satisfied.

18

Reviews

You need to log in to reply. Sign In | Sign Up