This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.


Bluetooth v5.2 (BLE) SMART SOC 2Mbps 3.3V 32-Pin QFN EP T/R

Inquiry Add To Bom

BLUENRG-345AC General Description

The BlueNRG-LP is an ultra-low power programmable Bluetooth? Low Energy wireless SoC solution. It embeds STMicroelectronics’s state-of-art 2.4 GHz RF radio IPs combining unparalleled performance with extremely long-battery lifetime. It is compliant with Bluetooth? Low Energy SIG core specification version 5.2 addressing point-to-point connectivity and Bluetooth Mesh networking and allows large-scale device networks to be established in a reliable way. The BlueNRG-LP is also suitable for 2.4 GHz proprietary radio wireless communication to address ultra-low latency applications.The BlueNRG-LP embeds a Cortex?-M0+ microcontroller that can operate up to 64 MHz and also the BlueNRG core coprocessor (DMA based) for Bluetooth Low Energy timing critical operations.The main Bluetooth? Low Energy 5.2 specification supported features are:2 Mbps data rate, long range (Coded PHY), advertising extensions, channel selection algorithm #2, GATT caching, hardware support for simultaneous connection, master/slave and multiple roles simultaneously, extended packet length support.In addition, the BlueNRG-LP provides enhanced security hardware support by dedicated hardware functions:True random number generator (RNG), encryption AES maximum 128-bit security co-processor, public key accelerator (PKA), CRC calculation unit, 64-bit unique ID, Flash memory read and write protection.The BlueNRG-LP can be configured to support standalone or network processor applications. In the first configuration, the BlueNRG-LP operates as single device in the application for managing both the application code and the Bluetooth Low Energy stack.The BlueNRG-LP embeds high-speed and flexible memory types:Flash memory of 256 kB, RAM memory of 64 kB, one-time-programmable (OTP) memory area of 1 kB, ROM memory of 7 kB.Direct data transfer between memory and peripherals and from memory-to-memory is supported by eight DMA channels with a full flexible channel mapping by the DMAMUX peripheral.The BlueNRG-LP embeds a 12-bit ADC, allowing measurements of up to eight external sources and up to three internal sources, including battery monitoring and a temperature sensor.The BlueNRG-LP has a low-power RTC and one advanced 16-bit timer.The BlueNRG-LP features standard and advanced communication interfaces:1x SPI, 2x SPI/I2S, 1x LPUART, 1x USART supporting ISO 7816 (smartcard mode), IrDA and Modbus mode, 2x I2C supporting SMBus/PMBus, 1x channel PDM.The BlueNRG-LP operates in the -40 to +105 °C temperature range from a 1.7 V to 3.6 V power supply. A comprehensive set of power-saving modes enables the design of low-power applications.The BlueNRG-LP integrates a high efficiency SMPS step-down converter and an integrated PDR circuitry with a fixed threshold that generates a device reset when the VDD drops under 1.65 V.The BlueNRG-LP comes in different package versions supporting up to:32 I/Os for the QFN48 package, 20 I/Os for the QFN32 package, 30 I/Os for the WCSP49 package.

STMicroelectronics, Inc Inventory

Key Features

  • Bluetooth Low Energy system-on-chip supporting Bluetooth 5.2 specifications
    • 2 Mbps data rate
    • Long range (Coded PHY)
    • Advertising extensions
    • Channel selection algorithm #2
    • GATT caching
  • Radio
    • RX sensitivity level: -97 dBm @ 1 Mbps, -104 dBm @ 125 kbps (long range)
    • Programmable output power up to +8 dBm (at antenna connector)
    • Data rate supported: 2 Mbps, 1 Mbps, 500 kbps and 125 kbps
    • 128 physical connections
    • Integrated balun
    • Support for external PA
    • BlueNRG core coprocessor (DMA based) for Bluetooth Low Energy timing critical operation
    • 2.4 GHz proprietary radio driver
    • Suitable for systems requiring compliance with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 part 15, ARIB STD-T66
  • Ultra-low power radio performance
    • 10 nA in SHUTDOWN mode (1.8 V)
    • 0.6 uA in DEEPSTOP mode (with external LSE and BLE wake-up sources, 1.8 V)
    • 0.9 uA in DEEPSTOP mode (with internal LSI and BLE wake-up sources, 1.8 V)
    • 4.3 mA peak current in TX (@ 0 dBm, 3.3 V)
    • 3.4 mA peak current in RX (@ sensitivity level, 3.3V)
  • High performance and ultra-low power Cortex-M0+ 32-bit, running up to 64 MHz
  • Dynamic current consumption: 18 μA/MHz
  • Operating supply voltage: from 1.7 to 3.6 V
  • -40 oC to 105 oC temperature range
  • Supply and reset management
    • High efficiency embedded SMPS step-down converter with intelligent bypass mode
    • Ultra-low power power-on-reset (POR) and power-down-reset (PDR)
    • Programmable voltage detector (PVD)
  • Clock sources
    • Fail safe 32 MHz crystal oscillator with integrated trimming capacitors
    • 32 kHz crystal oscillator
    • Internal low-power 32 kHz RO
  • On-chip non-volatile Flash memory of 256 kB
  • On-chip RAM of 64 kB or 32 kB
  • One-time-
STMicroelectronics, Inc Original Stock
STMicroelectronics, Inc Inventory


Category RF and WirelessRF Transceiver ICs Mfr STMicroelectronics
Series BlueNRG Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status Active Digi-Key Programmable Not Verified
Type TxRx + MCU RF Family/Standard Bluetooth
Protocol Bluetooth v5.2 Modulation GFSK
Frequency 2.4GHz ~ 2.4835GHz Data Rate (Max) 2Mbps
Power - Output 8dBm Sensitivity -97dBm
Memory Size 256kB Flash, 32kB RAM Serial Interfaces I²C, SPI
GPIO 32 Voltage - Supply 1.7V ~ 3.6V
Current - Receiving 3.4 mA Current - Transmitting 4.3mA
Operating Temperature -40°C ~ 85°C (TA) Mounting Type Surface Mount
Package / Case 32-VFQFN Exposed Pad Supplier Device Package 32-QFN (5x5)
Base Product Number BLUENRG feature-packaging Tape and Reel
feature-pin-count 32 feature-supplier-package QFN EP
feature-standard-package-name1 feature-cecc-qualified
feature-esd-protection feature-military No
feature-aec-qualified No feature-aec-qualified-number
feature-auto-motive No feature-p-pap No
feature-eccn-code 5A992.c feature-svhc
feature-svhc-exceeds-threshold No

Service Policies and Others

After-Sales & Settlement Related

payment Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

If you have specific preferences or requirements for payment channels, please contact our sales team. 

customers are required to pay all possible fees, including sales tax,customs fees, etc.

shipping Shipping And Packing
Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.


AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

warranty Warranty & Returns

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Ratings and Reviews

P**y 09/25/2023

The cables are softer than the ones I'm used to using (the ones that came in the Arduino starter kit) which makes them harder to insert into the breadboard without accidentally bending them. Other than that, it work fine.

C**s 01/20/2022

fast delivery thanks.

M**a 05/04/2021

Arrived very quickly-16 days. On serviceability did not check, but in appearance without defects.I ordered gum of different detalum. All packed on the pendants and signed. No comment. All the way.

G**n 04/04/2020

Two weeks to ivanovo.



You need to log in to reply. Sign In | Sign Up