This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

ATSAMDA1J14B-ABT

ARM Microcontrollers - MCU 64 TQFP 7x7x1.0mm, TAPE & REEL, CM0, 16kB FLASH, 4kB SRAM, TQFP64

Inquiry Add To Bom

ATSAMDA1J14B-ABT General Description

The SAM DA1 ARM? Cortex?-M0+ -based microcontrollers are operating at 48MHz (45DMIPS). The ATSAMDA1J14B provides 16KB Flash, 4kB SRAM and 512Byte RWW Flash. The connectivity peripheral set consists of 6 serial communication modules (SERCOM) that each can be configured to act as a USART, UART, SPI and I2C. Additional connectivity options are provided by the on-chip one channel Inter-IC sound interface (I2S) and the full-speed USB 2.0 embedded host and device.

Supported by MPLAB X IDE and MPLAB Harmony.

Functional Safety
This device supports the ISO 26262 (ASIL B) functional safety standard.
· The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety web page.
· Learn more about 32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.

Microchip Technology, Inc Inventory

Key Features

  • ARM Cortex-M0+ CPU running at up to 48MHz
  • Single-cycle hardware multiplier
  • Micro trace buffer
  • 16KB in-system self-programmable Flash
  • 0.5KB Read-While-Write (RWW) Flash section
  • 4KB SRAM memory
  • Power-on reset (POR) and brown-out detection (BOD)
  • Internal and external clock options with 48MHdigital frequency locked loop (DFLL48M) and 48MHto 96MHz
  • fractional digital phase locked loop (FDPLL96M)
  • External interrupt controller (EIC)
  • 16 external interrupts
  • One non-maskable interrupt
  • Two-pin serial wire debug (SWD) programming, test and debugging interface
  • Idle and standby sleep modes
  • SleepWalking peripherals
  • 8-channel direct memory access controller (DMAC)
  • 12-channel event system
  • One 16-bit TC with compare/capture channels
  • One 8-bit TC with compare/capture channels
  • One 32-bit TC with compare/capture channels, by using two TCs
  • Up to four compare channels with optional complementary output
  • Generation of synchronized pulse width modulation (PWM) pattern across port pins
  • Deterministic fault protection, fast decay and configurable dead-time between complementary output
  • Dithering for enhancing resolution with up to 5-bit and reduce quantization error
  • 32-bit real time counter (RTC) with clock/calendar function
  • Watchdog timer (WDT)
  • CRC-32 generator
  • Device 2.0 and reduced-host low speed and full speed
  • Flexible end-point configuration and management with dedicated DMA channels
  • On-chip transceivers including pull-ups and serial resistors
  • Crystal-less operation in device mode
  • USART with full-duplex and single-wire half-duplex configuration
  • I2C up to 3.4MHz
  • SPI
  • LIN Client
  • One two-channel inter-IC sound (I2S) interface
  • Differential and single-ended input
  • 1/2x to 16x programmable gain stage
  • Automatic offset and gain error compensation
  • Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
  • 10-bit, 350ksps digital-to-analog converter (DAC)
  • Two analog comparators (AC) with window compare function
  • Up to 256-channel capacitive touch and proximity sensing
  • 52 GPIO pins
  • 64-pin TQFP, QFN
  • 2.7V to 3.63V
  • –40 to +105°C
Microchip Technology, Inc Original Stock

Specifications

Category Integrated Circuits (ICs)EmbeddedMicrocontrollers Mfr Microchip Technology
Series SAM DA1, Functional Safety (FuSa) Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status Active Core Processor ARM® Cortex®-M0+
Core Size 32-Bit Single-Core Speed 48MHz
Connectivity I²C, SCI, SPI, UART/USART, USB Peripherals Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
Number of I/O 52 Program Memory Size 16KB (16K x 8)
Program Memory Type FLASH EEPROM Size -
RAM Size 4K x 8 Voltage - Supply (Vcc/Vdd) 2.7V ~ 3.63V
Data Converters A/D 16x12b; D/A 1x10b Oscillator Type Internal
Operating Temperature -40°C ~ 105°C (TA) Mounting Type Surface Mount
Package / Case 64-TQFP Supplier Device Package 64-TQFP (10x10)
Base Product Number ATSAMDA1

Service Policies and Others

After-Sales & Settlement Related

payment Payment

We accept TT prepayment (bank transfer), paypal, credit cards, Western Union, Money Gram.

If you have specific preferences or requirements for payment channels, please contact our sales team. 

customers are required to pay all possible fees, including sales tax,customs fees, etc.

shipping Shipping And Packing
Shipping Method

Our products are mainly transported and delivered by DHL, FedEx, UPS and other logistics partners on site -- Available to 200+ countries.

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

warranty Warranty & Returns

Our policies and procedures are designed to ensure compliance with various quality specifications and to quickly resolve quality-related issues.

We promise to provide 365 days quality assurance service for all our products.

If you have any dissatisfaction with the quality of the product you received, you can contact us for a refund or exchange, as long as the product is kept in its original condition.

Reviews

You need to log in to reply. Sign In | Sign Up

Availability: 4871 PCS

Qty. Unit Price(USD) Ext. Price
1+ $3.670 $3.67
200+ $1.421 $284.20
500+ $1.371 $685.50
1500+ $1.346 $2,019.00

The prices below are for reference only.