This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ACS724LLCTR-30AU-T +BOM

Open Loop Current Sensor

Manufacturer:

Allegro Microsystems
Mfr.Part #:

ACS724LLCTR-30AU-T
Datasheet:

ACS724LLCTR-30AU-T Datasheet (PDF)
Current Rating:

30 A
Sensor Type:

Current Sense
Type:

Linear Hall
Operating Supply Voltage:

4.5 V to 5.5 V
EDA/CAD Models:

Request Free CAD Models for ACS724LLCTR-30AU-T

ACS724LLCTR-30AU-T Information

Description

The ACS724LLCTR-30AU-T is a Hall effect, open-loop unidirectional current sensor manufactured by Allegro MicroSystems. This one-channel device can measure currents up to 30A and features a compact SOIC-8 package. It's designed for use in applications where accurate current measurement is required. This introduction highlights the key specifications and features of the ACS724LLCTR-30AU-T, making it suitable for engineers searching for a reliable solution for their design.

Package

The package type of ACS724LLCTR-30AU-T is a SOIC (Small Outline Integrated Circuit) - 8. It has a width of 3.90mm (0.154").

Pinout

Based on the product information, the ACS724LLCTR-30AU-T is an 8-pin SOIC (Small Outline Integrated Circuit) package.

The pinout for this device is as follows:

Pin 1: VCC (Positive Supply Voltage)
Pin 2: OUT (Output Signal)
Pin 3: GND (Ground Reference)
Pin 4: NC (No Connect)
Pin 5: NC (No Connect)
Pin 6: NC (No Connect)
Pin 7: NC (No Connect)
Pin 8: GND (Ground Reference)

The ACS724LLCTR-30AU-T is a unidirectional current sensor, and the OUT pin provides an analog output signal proportional to the input current. The VCC and GND pins provide power supply and ground connections for the device.

Manufacturer

The manufacturer of the ACS724LLCTR-30AU-T is Allegro MicroSystems, which is a subsidiary of TE Connectivity (TE).

Applications

Based on the product information, the ACS724LLCTR-30AU-T is a current sensor with a unidirectional open-loop design, making it suitable for applications where a precise measurement of DC or AC currents is required. Typical application areas include industrial control systems, motor drives, power supplies, and automotive systems, where monitoring and controlling electrical currents is crucial.

Equivalent

Based on Allegro MicroSystems' product documentation, the equivalent products to ACS724LLCTR-30AU-T are:

ACS724LLCTR-50AU-T (same specifications but with a higher current rating)
ACS725L-T (slightly different package and features)

Please note that finding exact equivalents might be challenging, as manufacturers may not always provide direct matches.

Specifications

Product Category	Board Mount Current Sensors	Current Rating	30 A
Sensor Type	Current Sense	Type	Linear Hall
Operating Supply Voltage	4.5 V to 5.5 V	Response Time	4 us
Accuracy	2 %	Frequency Range	120 kHz
Output Type	Analog	Series	ACS724
Height	1.75	Length	4.9 mm
Maximum Operating Temperature	+ 150 C	Minimum Operating Temperature	- 40 C
Moisture Sensitive	Yes	Product Type	Current Sensors
Factory Pack Quantity	3000	Subcategory	Sensors
Supply Voltage - Max	5.5 V	Supply Voltage - Min	4.5 V
Width	3.9 mm	Package/Case	SOIC-8